Zur BKtel Homepage
 
 
 
Produkte
Übersicht
2G6
BaalGiga
BaalMega
BaalNano
BaalFTTx
Optical Transmitter
Optical Amplifier
Optical Switch
Optical Network Units
Optical Receiver
OCR1016E Compact Optical Receiver Module
OCR1016E-WDM Compact Optical Receiver Module
OCR2209E Compact Optical Receiver Module
OCR2209E-WDM Compact Optical Receiver Module
Optical Splitter
CABLEwatch
Fiber.xSAT
Zubehör
 
 
  BaalFTTx - Series      
   
 
  OCR1016E
Compact Optical Receiver Module
   
       
 

Application

  • Optical receiver module for CATV video overlay in FTTx networks

Features

  • Ultra low noise push-pull technology
  • Bandwidth of 1 GHz
  • 46 dB CNR (typ.) for NTSC with
    OMI = 4%at –10 dBm optical input power @ 1550 nm
  • 28 dBmV RF output level
    (-5 dBm, 1550 nm, OMI = 4%)
  • Very low intermodulations
  • Low power consumption
  • Small package with single-mode fiber pigtail
  • Monitor voltage output
  • Output disable
  • Status - LEDs for input power ok
    and output enabled
 

 
       


 
 
Technical Data

Electrical/Optical Characteristics
Parameter
Symbol
Min Typ Max Unit
Optical Input Power
PIN
-10

 

-3
dBm
Optical Wavelength
λ
1280
1310/1550
1610 nm
Optical Return Loss
ORL
40

45

db
Power Supply Voltage
Vcc
 
5
  V
Power Supply Current
ICC

180

200
mA
Monitor Voltage
UCRXPO
Iphoto * 1000 Ohms
V
Optical Connector
single-mode fiber pigtail
RF-Connector
F – female
 
RF Characteristics
Parameter
Symbol
Min Typ Max Unit
RF bandwidth
B
47

-

1000
MHz
Receiver noise current
IENC  
4
4.5 pA/√Hz
RF Impedance
Z
75
 
Ohm
RF Return Loss

 

14 @ 47 MHz, -1 dB/oct.     dB
Flatness
ΔL
-1.0
+1.0
dB
Output Isolation
(output disabled)
40     dB
RF output level*)
L
26
28
30
dBmV
CSO for Cenelec 42 **)
CSO
63
(PIN=-3dBm)
66
(PIN=-5dBm)
  dB
CTB for Cenelec 42 **)
CTB
61
(PIN=-3dBm)
67
(PIN=-5dBm)
dB
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Operating Temperature Range
TOP
- 10
+ 60
°C
Storage Temperature Range
Tstg
-40
+ 85
°C
Optical Input Power
PIN
0
dBm
Power Supply Voltage
VCC
4.5
6.0
VDC
CATV Disable
The CATV disable pin 5 allows to deactivate the RF output by a 0-0.8V logic signal level; a 10 kOhms pull-up to VCC is internally connected to this pin (low = deactivated).
Diagnostic LEDs
Normal Operation
Optical Input Power LED: lightening green
Optical Input Power low
Optical Input Power LED: off          preadjusted for -14 ± 1 dBm
CATV Disabled
Power LED: off
CATV Enabled
Power LED: lightening green
 
Mechanical Outlines
 
 
Connector Pin Descriptions
Pin No. Description
1
VCC
Power Supply
2
N.C.
not connected
3
GND
GND
4
UCRXPO
Received optical power: The measured monitor voltage is the product
of photodiode current and 1000 Ohms resistance
5
Output Disable
OCR1016E: 10 kOhms pull-up toVCC, CATV signal disabled, if
connected to GND
 
 
*
  PIN = -5 dBm, 1550 nm, OMI = 4%, RF level decreases with 2:1 law with optical input power
**
  CSO/CTB contribution of OCR for Cenelec 42 signal according IEC 60728-3/EN 50083-3,
OMI = 4.1 %, 1550 nm
 
   
BKtel communications GmbH - www.bktel.com - E-Mail: info@bktel.com
Specifications subject to change without notice
 
 
     
 
Suche:
 

zurück zur Startseite zur Übersichtsseite zum Web-Impressum zum passwortgeschützten Kundenbereich